Exemplary Info About How To Check Your Water Meter

You’ll need to refer back to it later.

How to check your water meter. On the meter face you will see a red needle (similar to the hand of a. In that case, we cannot data log your meter, but you can do some checks yourself. If you have not had a new meter installed after 2017, you likely have an older style meter.

Check your current usage, by reading the meter in your basement (flip top of meter up and record all of the digits shown), then call 781.231.4137 with the reading. 1) lift and remove the concrete cover. Just grab a little stick or something, and just open this lid right here, said broyles, who reads about 500 water meters a day.

If your meter readings are high. Your meter may look different than. Run water until the last three digits on your meter reading are all zeros.

An easy to follow guide to reading your water meter and checking for water leaks on your property. If so, use the screwdriver to remove it, or lift it off with your hands. Here are some hints to help you find and read your water meter:

Insert a screwdriver in the hole on the top of the box and use it to lift the cover off. Turn off all the taps in your house and look at your meter. Your meter may have a lid or cap over the dial.

To test the accuracy of your meter, use the following procedure. If it is still turning, chances are you have a leak somewhere. There are 9 numbers on the.